TM 9-2320-387-24-2
1 18-6. ENGINE WIRING HARNESS REPLACEMENT (Cont’d)
1
14.
Remove two screws (141, clamps (151, and harness (16) from brackets (23).
15.
Remove nut (18), lockwasher (191, washer (201, ground lead (211, and washer (20) from stud (22).
Discard lockwasher (19).
16.
Remove nut and lockwasher assembly (271, capscrew (24), clamp (251, and harness (16) from dipstick
mounting bracket (26). Discard nut and lockwasher assembly (27).
17.
Disconnect four harness leads (29) from glow plugs (28).
18.
Disconnect two harness connectors (30) from water temperature sending unit (17).
18-37
