TM9-2320-387-24-2
I
18-6. ENGINE WIRING HARNESS REPLACEMENT (Cont’d)
I
11. Connect four harness leads (43) to glow plugs (42).
12.
Connect two harness leads (44) to engine temperature sending unit (31).
13.
Install harness (1) on two brackets (37) with clamps (30)
and screws (29).
14.
Install washer (341, ground lead (35), washer (34), lockwasher (331, and nut (32)
on stud (36).
15.
Install harness (1) on dipstick mounting bracket (40) with clamp (391, capscrew (381, and nut and
lockwasher assembly (4i).
18-41
