TM 9-2320-387-24-
1
3-54. TAILPIPE INSULATOR REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanics tool kit:
Equipment Condition
Tailpipe removed (para. 3-48).
automotive (Appendix B, Item 1)
XlaterialsPBrts
Four locknuts (Appendix G, Item 157)
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
Two lockwashers-(Appendix G, Item 206)
hianual References
TM Q-2320-387-24P
Maintenance
Level
Unit
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury may result.
II
1.
Remove four locknuts (51, washers (61, capscrews (Q), washers (81, two reinforcement plates (71, and
insulator (11) from tailpipe hanger (4). Discard locknuts (5).
2.
Remove two capscrews (31, lockwashers (2), reinforcement plate (l), and U-bolt clamp (10) from
insulator (11). Discard lockwashers (2).
b. Installation
1.
Install reinforcement plate (1) and U-bolt clamp (10) on insulator (11) with two lockwashers (2) and
capscrews (3). Tighten capscrews (3) to 10 lb-ft (14 Nom).
2.
Install insulator (11) and two reinforcement plates (7) on tailpipe hanger (4) with four washers (81,
capscrews (Q), washers (61, and locknuts (5). Tighten locknuts (5) to 10 lb-ft (14 Nom).
I
-
FOLLOW-ON TASK: Install tailpipe (para. 3-48).
3-99