TM 9-2320-387-24-l
3-55. MUFFLER SUPPORT BRACKET MAINTENANCE
._.
This task covers:
a. Removal
b. Disassembly
INITIAL SETUP:
c. Assembly
d. Installation
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
hlaterialearts
Four locknuts (Appendix G, Item 157)
Manual References
TM 9-2320-387-2413
Equipment Condition
hguffler and catalytic converter removed
(para. 3-49).
nlaintenance
Level
Unit
[I
NOTE
Hold bolt heads on transfer case securely to prevent changing
torque or damaging transfer case seal.
Remove two locknuts (11, washers (21, and support bracket assembly (31 from transfer case (4). Discard
locknuts ( 1).
.-’
1.
Remove two locknuts (91, washers (81, capscrews (51, washers (6), mounting bracket (ll), and
washers (6) from support plate (10). Discard locknuts (9).
2.
Remove two insulators (7) from mounting plate (11).
vc.Assemblyj
1.
Install two insulators (7) in mounting bracket (11).
2.
Install two washers (6) between mounting bracket (111 and support plate (101 with two washers (61,
capscrews (5), washers (81, and locknuts (9). Tighten locknuts (91 to 15 lb& (20 Nom).
[d.InstallationI
NOTE
Hold bolt heads on transfer case securely to prevent changing
torque or damaging transfer case seal.
Install support bracket assembly (3) on transfer case (4) with two washers (2) and locknuts (1). Tighten
locknuts (1) to 15 lb-R (20 Nom).
3-100
