TM 9-2320-387-24-l
3-56.
RIGHT EXHAUST MANIFOLD HEAT SHIELD REPLACEMENT
This task covers:
a. Removal
h. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
hIaterials/P&
Three lockwashers (Appendix G, Item 206)
hlanual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Hood raised and secured (TM 9-2320-387-10).
l Right rear heat shield removed (para. 3-58).
l Starter removed (para. 4-11).
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
hlaintenance
Level
Unit
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury may result.
a. Removal
1.
Remove two capscrews (51, lockwashers (61, and harness clamps (4) from right exhaust manifold
heat shield (3). Discard lockwashers (6).
2.
Remove four capscrews (7) and right exhaust manifold heat shield (3) from exhaust manifold (2) and
cylinder head (1).
b. Installation
1.
Install right exhaust manifold heat shield (3) on exhaust manifold (2) and cylinder head (1) with
four capscrews (7).
2.
Install two harness clamps (4) on right exhaust manifold heat shield (3) with two lockwashers (6) and
capscrews (5).
3-102
