t
TM 9-2320-387-24-l
3-53. TAILPIPE HANGER REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
hIaterials/Parts
Six locknuts (Appendix G, Item 157)
nlanual References
TM 9-2320-387-24P
Maintenance Level
Unit
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury may result.
rFiizz-1
1.
Remove four locknuts (51, washers (41, capscrews (91, washers (41, two insulator reinforcement
plates (lo), and insulator (8) from tailpipe hanger (6). Discard locknuts (5).
2.
Remove two locknuts Cl), washers (21, capscrews (71, washers (21,
and tailpipe hanger 6) from
frame (3). Discard locknuts (1).
b. Installation
1.
Install tailpipe hanger (6) on frame (3) with two washers (2), capscrews (71, washers (2% and
locknuts (1). Tighten capscrews (7) to 26 lb& (35 Nem).
2.
Install insulator (8) and two insulator reinforcement plates (10) on tailpipe hanger (6) with four
washers (41, capscrews (91, washers (41, and locknuts (5).
3-98