TM 9-2320-387-24-l
13-51.ANiF0~D-TO-TURBOCHARGEREXHAU~T~IPE
REPLACEMENT
I
Tbii task covers:
a. Removal
b. Installation
INrnAl. SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
Maintenance Level
unit
Rear heat shield removed (para. 3-52).
.
WARNiNG
Do not touch hot exhaust system components with bare hands. Severe injury
may result.
NOTE
The replacement procedure for left and right manifold-to-turbocharger exhaust
pipes is basically the same. This procedure covers the 1eR exhaust pipe.
rzzGil
1.
Loosen clamp (5) and remove exhaust pipe (11 from exhaust manifold (4). Slide clamp (5) onto pipe (1).
2.
Loosen clamp (21 and remove exhaust pipe (11 from turbocharger (3). Slide clamp (21 onto exhaust pipe (1).
3.
Remove clamps (21 and (51 from exhaust pipe (11.
1 b. Installation
1
1.
2.
3.
Install two clamps (2) and (5) on exhaust pipe (11.
Install exhaust pipe (1) on turbocharger (31 and tighten clamp (2).
Install exhaust pipe (1) on exhaust manifold (41 and tighten clamp (5).
.
--
FOLLOW-ON TASK: Install rear heat shield (para. 3-52).
3-96
