TM 9-2320-387-24-l
3-50. EXHAUST PIPE REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General
mechanic’s tool kit:
automotive
(Appendix B, Item 1)
Maintenance
and repair shop equipment:
automotive
(Appendix B, Item 21
Materials/Parts
Equipment Condition
Right rear heat shield removed (para. 3-58).
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
Three locknuts (Appendix G, Item 157)
Gasket (Appendix G, Item 55)
Maintenance Level
Unit
>Ianual References
TM 9-2320-387-10
TM 9-2320-387-24P
WARNING
Do not touch hot exhaust system components with bare hands. Severe
injury may result.
1 a. Removal
1
1.
Remove two clamps (12) and heat shield (111 from exhaust pipe (3).
2.
Remove three locknuts (5), washers (4), capscrews (7), washers (41, and exhaust pipe (3) from
catalytic converter (2). DicLard locknuts (5).
3.
Remove two capscrews (8), washers (91, flange (lo), and exhaust pipe (31 from wastegate housing (1).
4.
Remove and discard gasket (6).
r!zzzzq
1.
Install flange (10) and exhaust pipe (3) on wastegate housing (1) with two washers (9) and
capscrews (8).
2.
Install gasket (6) and exhaust pipe (3) on catalytic converter (2) with three washers (41, capscrews (7),
washers (41, and locknuts (5). Tighten locknuts (5) to 26 lb-R (35 N-m).
3.
Install heat shield (11) on exhaust pipe (3) with two clamps (12).
3-94
