TM9-2320-387-24-2
I
18-6. ENGINE WIRING HARNESS REPLACEMENT (Cont’d)
I
28. Install battery cable 7A (32), lead 3D (301, and winch cable 7W (29), if equipped, on starter negative
terminal (33) with lockwasher (28) and nut (27). Tighten nut (27) to 39 lb-ft (53 Num).
29.
Install battery cable 6A (31), lead 81B (261, and winch cable 6W (23), if equipped, on starter positive
terminal (19) with lockwasher (24) and nut (25). Tighten nut (25) to 39 lb-R (53 Nom).
30.
InstaII leads 74B (18) and 74A (20) on starter solenoid (17) with clip (21) and screw (22).
31.
Install battery cable 6A (31) on starter motor (16) with clamp (35) and screw (34).
FOLLOW-ON TASKS: l Install air horn (para. 3-14).
Install engine access cover (para. 10-22).
Connect battery ground cables (para. 468).
Lower and secure hood (TM 9-2320-387-10).
Start engine (TM 9-2320-387-10) and check for proper operation.
18-45/(18-46 blank)
