TM 9-2320-387-24-2
I---
26-3.
9,000
LB WINCH
REPAIR (Cont’d)
~--7
27.
Install three leads (3) on terminals (41 with nuts (2) and slide rubber boots (1) over nuts (2).
28.
Apply pipe sealant to threads of setscrew (5) and install on motor (6).
29.
Connect control connector (14) to motor connector (15).
30.
Install lead 6 (12) on control pack (13) with nut (11).
31.
Install lead 7 (7) and ground lead (8) on motor (61 with lockwasher (9) and capscrew (101.
32.
Using coating compound, coat motor end of winch (6) up to motor end drum support (18).
33.
Install motor control cover (17) and ground lead (81 on control pack (13) with three screws (16).
FOLLOW-ON TASKS: l Install winch (Ml1141 (para. 12-33).
l Install winch (M1113) (para. 12-27).
l Install winch cable (para. 12-28).
26-10
