TM 9-2320-387-24-2
I
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d)
I
12.
Disconnect harness connector (1) from brake warning lamp switch (2).
13. Remove three locknuts (41, capscrews (6), clamps (51, and harness (9) from cowl (3). Discard
locknuts (4).
14.
Remove locknut (81, clamp (71, and harness (9) from cowl (3). Discard locknut (8).
NOTE
Top screws connecting closeout plate may be longer than other
screws if the fuel filter drain tube is routed to top of closeout
plate.
15.
Remove four locknuts (121, screws (131, closeout plate (10). and grommet (11) from cowl (3). Discard
locknuts (12).
16.
Remove closeout plate (10) and grommet (11)
from harness (9).
27-4
