TM 9-2320-387-24-2
26-3.
9,000
LB WINCH REPAIR (Cont'd)
1. Position 85-87 steel balls (35) in groove of intermediate ring gear (2) and install in gear housing (10).
NOTE
Opening in retaining ring should be 90” from clutch lever.
2.
Install retaining ring (27) in gear housing (10).
3.
Install thrust plate (36), input sun gear (ll), and input gear carrier (12) in gear housing (10).
4.
Install clutch lever (1) on clutch shaft (31) with nut (30).
5.
Install detent ball (32), spring (33), and detent spacer (34) in gear housing (10).
6.
Apply aircraft grease to output ring gear (14), intermediate gear carrier (13), output gear carrier (15),
and input gear carrier (12).
NOTE
Ensure ring gear engages in gear housing.
7.
Install gasket (37) and output ring gear (14) on gear housing (10).
8.
Install intermediate gear carrier (13) on gear housing (10).
9.
Install output gear carrier (15) on input gear carrier (12).
26-7
