TM 9-2320-387-24-l
4-80. WIRING HARNESS CONNECTOR REPAIR (Cont’d)
c. Female Cable Connector Repair
1.
Strip cable insulation (12) from cable (13) to equal depth of terminal well (16).
2.
Slide shell (14) and sleeve (15) over cable insulation (12).
3.
Insert cable (13) into terminal well (16) and crimp.
4.
Slide shell (14) and sleeve (15) over terminal (17).
d. Connector Assembly Repair
1.
2.
3.
4.
5.
NOTE
Refer to TB SIG222 for soldering instructions.
Strip cable insulation (18) to depth of solder wells (21) on inserts (22).
Slide cable ends (25) through grommet retaining nut (19) and grommet (20).
Place cable ends (25) into solder wells (21) and solder.
Slide grommet (20) over inserts (22) and press into shell assembly (23) and coupling nut (24) until
seated.
Screw grommet retaining nut (19) into shell assembly (23) until seated.
MALE INSERT
OR
FEMME INSERT
4-147
