TM9-2320-387-24-l
4-79. HOOD JUMPER WIRING HARNESS REPLACEMENT (Cont’d)
8. Position right side jumper wiring hamess (9) in approximate mounting position.
9.
Install rubber grommet (8) on hood (10).
10.
Apply antiseize compound to right composite light ground 92C (11) and install on buss bar (7) with
lo&washer (1) and capscrew (2).
11.
Connect harness leads 20F (3),60B (51, and 491B (6) to left composite light terminals (4).
4-144
