TM 9-2320-280-20-3
12-10. CDR VALVE VENT LINE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
All models except M966, M966A1, M1025,
TM 9-2320-280-10
M1025A1, M1025A2, M1026, M1026A1,
TM 9-2320-280-24P
M1097, M1097A1, M1097A2
Equipment Condition
Tools
Hood raised and secured (TM 9-2320-280-10).
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
‘IWO tiedown straps (Appendix G, Item 241)
1. Loosen clamp (2) and disconnect CDR valve vent line (3) from CDR valve (1).
2. Remove two tiedown straps (5) from vent line (3) and existing hoses (6) on “A” beam (4).
Discard tiedown straps (5).
3. Loosen clamp (2) and remove vent line (3) from elbow (8) on selector valve (7).
4. Remove clamps (2) from vent line (3).
b. Installation
1. Install clamps (2) on vent line (3).
2. Connect vent line (3) to elbow (8) on selector valve (7) with clamp (2).
3. Install vent line (3) along “A” beam (4) on existing hoses (6) with two tiedown straps (5).
4. Connect vent line (3) to CDR valve (1) with clamp (2).
FOLLOW-ON TASK:
Lower and secure hood (TM 9-2320-280-10).
12-13
