12-15
TM 9-2320-280-20-3
12-12. DEEP WATER FORDING SENSOR CUP REPLACEMENT
I
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
Manual References
All models except M966, M966A1, M1025,
TM 9-2320-280-24P
M1025A1, M1025A2, M1026, M1026A1
Equipment Condition
Tools
Engine access cover removed (para. 10-15).
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 58)
1.
Loosen clamp (3) and disconnect sensor cup vent line (2) from sensor cup (4).
2.
Remove two locknuts (1), washers (6), capscrews (5), washers (6), and sensor cup (4) from
body (7). Discard locknuts (1).
1. Install sensor cup (4) on body (7) with two washers (6), capscrews (5), washers (6), and locknuts (1).
Tighten locknuts (1) to 6 lb-ft (8 N-m).
2. Connect sensor cup vent line (2) to sensor cup (4) with clamp (3).
FOLLOW-ON TASK: Install engine access cover (para. 10-15).
