TM 9-2320-280-20-3
12-13. SENSOR CUP VENT LINE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tol kit:
l Hood raised and secured (TM 9-2320-280-10).
automotive (Appendix B, Item 1)
l Egine access cover removed (paa. 10-15).
Manual References
TM 9-2320-280-10
TM 9-2320-20-24P
1. Loosen clamp (3) and disconnect sensor cup vent line (1) from CDR valve (2).
2. Loosen clamp (6) and remove vent line (1) from sensor cup (5).
3. Remove two clamps (3) and (6) from vent line (1).
1. Install two clamps (3) and (6) on vent line (1).
2. Route vent line (1) through “A” beam (4).
3. Connect vent line (1) to sensor cup (5) with clamp (6).
4. Connect vent line (1) to CDR valve (2) with clamp (3).
FOLLOW-ON TASKS: . Install engine access cover (para. 10-15).
. Lower and secure hood (TM 9-2320-280-10).
12-16
