TM 9-2320-280-20-3
12-8. FUEL TANK VENT STACK TUBE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
All models except M966, M966A1, M1025,
TM 9-2320-280-10
M1025A1, M1025A2, M1026, M1026A1,
TM 9-2320-280-24P
M1097, M1097A1, M1097A2
Equipment Condition
Tools
Hood raised and secured (TM 9-2320-280-10).
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two lockwashers (Appendix G, Item 132)
1. Disconnect fuel tank vent line (8) from fuel tank vent stack tube (2).
2. Remove nut (10), lockwasher (9), screw (7), and clamp (6) from fuel tank vent stack tube (2) and air
intake assembly (1). Discard lockwasher (9).
3. Remove screw (5), lockwasher (4), fuel tank vent stack tube (2), and clamp (3) from air intake
assembly (1). Discard lockwasher (4).
b. Installation
1.
2.
3.
Install fuel tank vent stack tube (2) and clamp (3) on air intake assembly (1) with lockwasher (4)
and screw (5).
Install fuel tank vent stack tube (2) and clamp (6) on air intake assembly (1) with lockwasher (9),
screw (7), and nut (10).
Connect vent line (8) to vent stack tube (2).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
12-10
