TM 9-2320-280-20-3
12-9. SELECTOR VALVE REPLACEMENT (Contd)
b. Installation
1.
Install elbow (12), connector (7), and elbow (5) on selector valve (4).
2.
Connect CDR valve vent line (10) to selector elbow (12) with clamp (11).
3.
Connect selector valve-to-union tee vent line (8) to connector (7).
4.
Connect air cleaner-to-selector valve vent line (6) to elbow (5).
5.
Install selector valve (4) on body (3) with two washers (13), capscrews (14), washers (13), and
locknuts (9). Tighten locknuts (9) to 10 lb-ft (14 N.m).
6.
Install selector control (2) on selector valve (4) with screw (1).
FOLLOW-ON TASKS: l Install engine access cover (para. 10-15).
. Lower and secure hood (TM 9-2320-280-10).
12-12