12-6. AIR CLEANER DUST CAP MAINTENANCE
This task covers:
a. Removal
c. Installation
b. Inspection
a. Removal
1.
Remove four screws (5) and dust unloader cover plate (4) from air cleaner bracket (6).
2.
Remove clamp (2) and air cleaner dust cap (3) from air cleaner assembly (1).
INITIAL SETUP:
Applicable Models
All models except M966, M966A1, M1025,
M1025A1, M1025A2, M1026, M1026A1,
M1121
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Hood raised and secured (TM 9-2320-280-10).
b. Inspection
1.
Install dust cap (3) on air cleaner assembly (1) with clamp (2). Tighten clamp (2) to 45-50 lb-in.
(5-6 N•m).
2.
Install dust unloader cover plate (4) on air cleaner bracket (6) with four screws (5).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
TM 9-2320-280-20-3
12-8
Change 1
c. Installation
Inspect air cleaner dust cap (3) for cuts, tears, obstructions, or enlarged gap. Replace if cut, torn, worn,
missing, or if center opening exceeds 0.125 in. (3.18 mm).
