TM 9-2320-280-20-3
11-51. WEAPON STATION HATCH TUBE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Applicable Models
General mechanic’s tool kit
All models except M996, M996A1, M997,
automotive (Appendix B, Item 1)
M997A1, M997A2, M998, M998A1, M1035,
Materials/Parts
M1035A1, M1035A2, M1037, M1038, M1038A1,
M1042, M1097, M1097A1, M1097A2
Ten locknuts (Appendix G, Item 106)
Manual References
TM 9-2320-280-24P
I
a. Removal
I
NOTE
l Note locations of capscrews for installation.
l Later production vehicles are equipped with spacers.
Remove ten locknuts (5), washers (1), capscrews (2), washers (1), hatch tube (4), and five spacers (6), if
installed, from weapon station (3). Discard locknuts (5).
b. Installation
I
(
NOTE
TOW mount pedestal and TOW MGS pan/armament cover and
armament mount panel must be in place prior to installing weapon
station hatch tube assembly.
Install five spacers (6), if removed, and hatch tube (4) on weapon station (3) with ten washers (1),
capscrews (2), washers (1), and locknuts (5). Tighten locknuts (5) to 37 lb-ft (50 N.m).
11-72
