Change 1
11-69
Materials/Parts
Locknut (Appendix G, Item 58)
Two rivets (Appendix G, Item 177.1)
Manual References
TM 9-2320-280-24P
11-48.
WEAPON STATION BUMPER PAD REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
NOTE
• Perform step 1 for old configuration vehicles.
• Perform step 2 for new configuration vehicles.
1.
Install bumper pad (2) on hatch (1) with screw (3), washer (4), and locknut (5).
2.
Install bumper pad (2) on hatch (1) with rivet (6).
b. Installation
TM 9-2320-280-20-3
NOTE
• For instructions on replacement of rivets, refer to para. 10-66.
• Bumper pads for both sides of hatch are installed basically the
same. This procedure covers the right side.
NOTE
• Perform step 1 for old configuration vehicles.
• Perform step 2 for new configuration vehicles.
1.
Remove locknut (5), washer (4), screw (3), and bumper pad (2) from hatch (1). Discard locknut (5).
2.
Remove rivet (6) and bumper pad (2) from hatch (1).
OLD CONFIGURATION
NEW CONFIGURATION
INITIAL SETUP:
Applicable Models
All models except M996, M996A1,
M997, M997A1, M997A2, M998, M998A1,
M1035, M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1,
M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
