TM 9-2320-280-20-3
11-52. HINGE PIVOT BRACKET AND GUNNER’S SLING REPLACEMENT
I
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
Materials/Parts
All models except M996, M996A1, M997,
Locknut (Appendix G, Item 106)
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038,
Manual References
M1038A1, M1042, M1097, M1097A1, M1097A2
TM 9-2320-280-24P
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
1. Remove locknut (8), washer (2), capscrew (3), washer (2), gunner’s sling (9), and hinge pivot
bracket (6) from weapon station (1). Discard locknut (8).
2. Remove capscrew (4), washer (5), and hinge pivot bracket (6) from weapon station (1) and rear hinge
pin (7).
1. Install hinge pivot bracket (6) on rear hinge pin (7).
2. Install hinge pivot bracket (6) on weapon station (1) with washer (5) and capscrew (4). Tighten
capscrew (4) to 37 lb-ft (50 N-m).
3. Install hinge pivot bracket (6) and gunner’s sling (9) on weapon station (1) with washer (2),
capscrew (3), washer (2), and locknut (8). Tighten locknut (8) to 37 lb-ft (50 N.m).
11-73
