11-70
Change 1
Materials/Parts
Four spring washers (Appendix G, Item 235)
Sealing compound (Appendix C, Item 40)
Manual References
TM 9-2320-280-24P
11-49. WEAPON STATION TRAY LEVER REPLACEMENT
This task covers:
a. Removal
b.
Installation
Remove capscrew (4), washer (3), two spring washers (2), tray lever (1), two spring washers (2), and
washer (3) from weapon station (5). Discard spring washers (2).
a. Removal
NOTE
Apply sealing compound to threads on capscrew.
Install washer (3), two spring washers (2), and tray lever (1) on weapon station (5) with two spring
washers (2), washer (3), and capscrew (4). Tighten capscrew (4) to 6 lb-ft (8 N•m).
b. Installation
TM 9-2320-280-20-3
INITIAL SETUP:
Applicable Models
All models except M996, M996A1,
M997, M997A1, M997A2, M998, M998A1,
M1035, M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1,
M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
