11-54. WEAPON STATION BACKREST PAD REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove three locknuts (4), washers (2), capscrews (3), washers (2), and backrest pad (5) from weapon
station (1). Discard locknuts (4).
INITIAL SETUP:
Applicable Models
All models except M996, M996A1, M997,
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1,1097A2,
M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Three locknuts (Appendix G, Item 106)
Manual References
TM 9-2320-280-24P
b. Installation
Install backrest pad (5) on weapon station (1) with three washers (2), capscrews (3), washers (2),
and locknuts (4). Tighten locknuts (4) to 37 lb-ft (50 N•m).
NOTE
The procedure for removing and installing left and right backrest
pads is the same. This procedure covers right backrest pad.
TM 9-2320-280-20-3
Change 1
11-75
