TM 9-2320-280-20-3
11-44. WEAPON STATION HATCH HINGE PIN REPLACEMENT
This task covers:
a Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All models except M996, M996A1, M997,
TwO locknuts (Appendix G, Item 106)
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038, M1038A1,
Manual References
M1042, M1097, M1097A1, M1097A2
TM 9-2320-280-24P
Tools
General mechanic’s tool kit
automotive (Appendix B, Item 1)
a. Removal
1. Remove two locknuts (3), washers (4), capscrews (7), and washers (4) from hatch hinge pin (5) and
hatch panel (1). Discard locknuts (3).
NOTE
Spacer not required on M1043, M1043A1, M1043A2, M1044, M1044A1,
M1045, M1045A1, M1045A2, M1046, and M1046A1 vehicles.
2. Remove hatch hinge pin (5) and two spacers (2) from hinge pivot bracket (6) and hatch panel (1).
b. Installation
1.
2.
Install hatch hinge pin (5) on hatch panel (1) and slide into hinge pivot bracket (6). Slide two
spacers (2) between hatch panel (1) and hinge pin (5) on top side of hatch panel (1).
Secure hatch hinge pin (5) to hatch panel (1) with two washers (4), capscrews (7), washers (4), and
locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 N.m).
11-64
