TM 9-2320-280-20-3
10-111. WINCH VENT LINE REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
Manual References
M997A2, M1025A2, M1026, M1026A1,
TM 9-2320-280-10
M1035A2, M1036, M1038, M1038A1, M1042,
TM 9-2320-280-24P
M1043A2, M1044, M1044A1, M1045A2,
M1046, M1046A1, M1097A2
Equipment Condition
l Hood raised and secured (TM 9-2320-280-10).
Tools
l Engine right splash shield removed (para. 10-20).
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four tiedown straps (Appendix G, Item 243)
I
a Removal
I
1. Disconnect vent line (2) from winch fitting (4).
2. Remove three tiedown straps (5) and tiedown strap (6) (9,000 lb. winch only) from vent line (2) and
cables (1). Discard tiedown straps (5) and (6).
3. Disconnect vent line (2) from tee fitting (3) and remove vent line (2).
I
b. Installation
1. Connect vent line (2) to tee fitting (3) and winch fitting (4).
2. Install vent line (2) on cables (1) with tiedown strap (6) (9,000 lb. winch only) and three tiedown
straps (5).
FOLLOW-ON TASK: “
l
Loawer and secure hood (TM 9-2320-280-10).
Install engine right splash shield (para. 10-20).
10-192
