TM 9-2320-280-20-3
10-190.2/(10-191 blank)
Change 1
10-110.1. HYDRAULIC WINCH CABLE REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Applicable Models
All vehicles except M996, M996A1, M997,
M997A1, M997A2, M1035, M1035A1,
M1035A2
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Personnel Required
One mechanic
One assistant
WARNING
Gloves must be worn whenever handling winch cable. Severe
injury may result.
1.
Unwind winch cable (4) from drum assembly (1) (TM 9-2320-280-10).
2.
Remove screw (2), clamp (3), and cable (4) from drum assembly (1).
3.
Loosen clamp (5) and remove clamp (5) and hook (6) from cable (4).
NOTE
Install thimble on winch cable to keep wires from shearing or
breaking. Refer to appendix D, fig. D-91 for instructions.
1.
Install clamp (5) and hook (6) on winch cable (4) and tighten clamp (5).
2.
Install winch cable (4) on drum assembly (1) with clamp (3) and screw (2).
3.
Wind winch cable (4) on drum assembly (1) (TM 9-2320-280-10).
b. Installation
a. Removal
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
General Safety Instructions
Wear leather gloves when handling winch cable.
FOLLOW-ON TASKS: Lubricate winch cable (TM 9-2320-280-10).
Check winch for proper operation (TM 9-2320-280-10).
