10-112. FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove four retaining rings (6), two shafts (5), and rollers (7) from bracket (4).
2.
Remove four retaining rings (8), two shafts (10), and rollers (9) from bracket (4).
3.
Remove two capscrews (2), washers (3), and bracket (4) from bumper (1).
INITIAL SETUP:
Applicable Models
M997A2, M1025A2, M1035A2, M1043A2,
M1045A2, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
General Safety Instructions
Winch must be supported during removal and
installation.
b. Installation
1.
Install bracket (4) on bumper (1) with two washers (3) and capscrews (2). Tighten capscrews to
35 lb-ft (47 N•m).
2.
Install two rollers (9) and shafts (10) in bracket (4) with four retaining rings (8).
3.
Install two rollers (7) and shafts (5) in bracket (4) with four retaining rings (6).
TM 9-2320-280-20-3
Change 1
10-193
WARNING
Winch must be supported during removal and installation. Failure
to support winch may result in injury to personnel or damage to
equipment.
