TM 9-2330-392-14&P
4-32
Change 2
4-19.1
BRANCHED WIRING HARNESS REPLACEMENT.
This task covers:
a. Installation
b. Removal
Initial Setup:
Equipment Conditions:
Parked on a level surface.
Wheels chocked (para 2-8.1).
Handbrakes applied.
Front and side marker light assemblies removed (para
4-17).
Tools/Test Equipment:
General mechanics tool kit
Common No. 1 shop set
Materials/Parts:
Rivets
Tags
Wiring Harness
a.
REMOVAL
NOTE
Ensure intervehicular cable is disconnected.
1.
Remove rivets (1) and clamps (2) securing branched wiring harness (3) to trailer frame. Discard rivets (1).
2.
Tag and disconnect branched wiring harness (3) from intervehicular cable junction (4) and remove branched wir-
ing harness (3) from trailer frame.
b.
INSTALLATION
CAUTION
Ensure proper alignment of wiring harness to avoid damage to wiring harness as it passes through
the trailer frame.
1.
Connect wiring harness (3) to intervehicular cable junction (4) and install wiring harness (3) on trailer frame.
2.
Install new rivets (1) and clamps (2) securing wiring harness (3) to trailer frame.
FOLLOW-ON TASKS:
Install front/side marker lights (para 4-17).
Connect intervehicular cable.
Check lights for proper operation.
Disconnect intervehicular cable.
