TM 9-2330-392-14&P
4-19.
INTERVEHICULAR CABLE REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Intervehicular cable disconnected from
•
One Rivet
towing vehicle (para 2-12).
•
One Clamp
Tools/Test Equipment:
•
General mechanics tool kit
a.
REMOVAL
NOTE
Tag wires for installation if marker bands are missing or illegible.
1.
Remove rivet (2) securing cable clamp (3) to trailer frame. Discard rivet.
2.
Remove cable clamp (3) securing intervehicular cable (1) to trailer frame. Discard clamp.
3
Tag and disconnect intervehicular cable (1) from wiring harness cable (4) junction and remove intervehicular cable
(1) from trailer frame.
b.
INSTALLATION
1.
Connect intervehicular cable (1) to wiring harness cable (4)junction and install intervehicular cable (1) in trailer
frame.
2.
Install new rivet (2) and new cable clamp (3) securing intervehicular cable (1) to trailer frame.
NOTE
Ensure proper alignment of intervehicular cable to avoid damage to
intervehicular cable as it passes through the trailer frame.
FOLLOW-ON TASKS:
•
Connect intervehicular cable to towing vehicle (para 2-10).
•
Check operation of lights (TM 9-2320-280-10).
4-30
