TM 9-2330-392-14&P
4-18.
REAR MARKER LIGHTS MAINTENANCE.
This task covers:
a.
Lens and Lamp Replacement
c.
Lamp Assembly Installation
b.
Lamp Assembly Removal
Initial Setup:
Equipment Conditions:
Materials/Parts:
Intervehicular cable disconnected from towing
Marker Tags (Item 13, Appendix E)
vehicle (para 2-12)
Four Rivets
Tools/Test Equipment:
General mechanics tool kit
a.
LENS AND LAMP REPLACEMENT
1.
Remove two screws (2) securing door (3) and lens (4) to light body (6). Remove door (3) and lens (4).
2.
Remove lamp (5) from socket (7) by pushing in and turning counterclockwise
3.
Install lamp (5) m socket (7) by pushing in and turning clockwise.
4.
Install lens (4) and door (3) to light body (6) and secure with two screws (2).
b.
LAMP ASSEMBLY REMOVAL
NOTE
Tag wires for installation if marker bands are missing or illegible.
1.
Remove two screws (2) securing lens (4) and door (3) to light body (6) Remove lens (4) and door (3).
2.
Remove four rivets (1) securing light body (6) to cargo body bracket (8)
3.
Cut wire ties (10) and disconnect rear marker light connector (9) from main wiring harness (11)
4.
Remove rear marker light body (6) from cargo body bracket (8)
c.
LAMP ASSEMBLY INSTALLATION
NOTE
Ensure ground wire is installed to one of the attaching hardware
1.
Install four rivets (1) securing marker light body (6) to cargo body bracket (8).
2.
Connect connector (9) to main wiring harness (11) and install wire ties (10)
3.
Install two screws (2) securing lens (4) and door (3) to high body (6)
FOLLOW-ON TASKS:
Connect intervehicular cable to towing vehicle (para 2-10)
Check operation of light (TM 9-2320-280-10)
4-28