TM 9-2330-392-14&P
4-64
Change 2
4-27
HYDRAULIC BRAKE ACTUATOR ASSEMBLY MAINTENANCE (CONT).
4.
Remove four capscrews (29) securing master cylinder mounting plate (27) to brake actuator housing (14).
Remove master cylinder (5) with attached mounting plate (27) from actuator housing (14). Discard capscrews
(29).
5.
Remove hydraulic actuator breakaway spring lever (21) and attached breakaway cable (20) from actuator hous-
ing (14). Then remove breakaway lever spring (22).
6.
Remove two capscrews (26), nuts (23), washer (24), and springs (25) securing master cylinder mounting plate
(27) and push rod assembly (28) to master cylinder (5). Carefully remove push rod assembly (28) and mounting
plate (27) from master cylinder (5).
7.
Remove nut (30), upper bolt (32), and roller (31) from actuator housing (14).
