TM 9-2330-392-14&P
4-62
Change 2
4-27
HYDRAULIC BRAKE ACTUATOR ASSEMBLY MAINTENANCE.
This task covers:
a. Removal
c. Cleaning and Inspection
b. Disassembly
d. Assembly
e. Installation
Initial Setup:
Equipment Conditions:
• Handbrakes applied.
• Wheels chocked (para 2-8.1).
• Safety chains removed (para 4-35).
Tools/Test Equipment:
• General mechanics tool kit
• Common No. 1 shop set
Materials/Parts:
• Rags (Item 16, Appendix E)
• Dry cleaning solvent (Item 5, Appendix E)
• Wire brush (Item 3, Appendix E)
• Four locknuts
• Container
• Cotter pin
• Four capscrews
a.
REMOVAL
1.
Remove cap (1) from master cylinder (5).
2.
Remove cover (9) from master cylinder (5). Then reinstall cap (1) on master cylinder (5).
NOTE
•
Use a suitable container to catch any draining brake fluid. Ensure that all spills are cleaned up.
•
Master cylinder orifice (4) requires a 12-mm wrench.
