TM 9-2330-392-14&P
Change 2
4-63
4-27
HYDRAULIC BRAKE ACTUATOR ASSEMBLY MAINTENANCE (CONT).
3.
Disconnect flex brake line (2) from master cylinder orifice (4) and install temporary plug in flex brake line fitting
end (3).
4.
Remove two locknuts (6), two washers (7), and two capscrews (10) securing hydraulic actuator assembly (8) to
trailer. Discard locknuts.
5.
Remove hydraulic actuator assembly (8) from trailer.
b.
DISASSEMBLY
1.
Remove cotter pin (13) from master pin (12). Remove master pin (12) and washer (15). Discard cotter pin.
2.
Remove lunette (11), with damper pin (16) and two rollers (18) attached, from brake actuator (14).
3.
Remove cotter pin (17) and damper pin (16) securing damper (19) to lunette (11). Discard cotter pin.
