TM 9-2320-387-24-2
1 10-47. THREE POINT SEATBELT MAINTENANCE
(Cont’d)
I
I
I
d. Rear Seatbelt Removal
NOTE
Maintenance procedures for left and right seatbelts are basically
the same. This procedure covers the right seatbelt.
1.
Remove capscrew (111, buckle assembly (141, and washer (12) from body (13).
2.
Remove capscrew (101, connector assembly (151, and washer (9) from bracket (8).
,
3.
Remove capscrew (11, D-ring (2), and washer (3) from bracket (4).
4.
Remove capscrew (61, washer (51, and retractor (7) from bracket (4).
e. Rear Seatbelt Bracket Inspection
Inspect brackets (4) and (8). Replace if broken, bent, or cracked.
f. Rear Seatbelt Installation
1. Install retractor (7) on bracket (4) with washer (5) and capscrew (6). Tighten capscrew (6) to
35-40 lb-R (47-54 N-m).
2.
Install washer (3) and D-ring (2) on bracket (4) with capscrew (1). Tighten capscrew (1) to
35-40 lb-ft (47-54 N-m).
3.
Install washer (9) and connector assembly (15) on bracket (8) with capscrew (10). Tighten cap-
screw (10) to 35-40 lb-f% (47-54 Nom).
4.
Install washer (12) and buckle assembly (14) on body (13) with capscrew (11). Tighten capscrew (11)
to 35-40 lb-R (47-54 N-m).
1 O-80
