TM 9-2320-387-24-2
Change 1
10-79
10-47. THREE POINT SEATBELT MAINTENANCE (Cont'd)
1.
Install retractor (26) on lower bracket (27) with washer (25) and capscrew (24). Tighten capscrew (24)
to 43-60 lb-ft (58-81 N•m).
NOTE
Perform steps 2 and 3 for M1114 models only.
2.
Install bracket (4), padding (5), and D-ring (6) on upper support (3) with washer (7), screw (8),
washer (2), and locknut (1). Tighten screw (8) to 37 lb-ft (50 N•m).
3.
Install clamp (11) and saddle block (10) on upper support (3) with two washers (9.1) and screws (9).
Tighten screws (9) to 35 lb-in. (4 N•m).
NOTE
Perform step 4 for M1113 models only.
4.
Install washer (14) and D-ring (13) on padding (15) with capscrew (12). Tighten capscrew (12) to
35-40 lb-ft (47-54 N•m).
5.
Install washer (17) and connector assembly (18) on bracket (16) with capscrew (19). Tighten
capscrew (19) to 35-40 lb-ft (47-54 N•m).
6.
Install washer (22) and buckle assembly (21) on body (23) with capscrew (20). Tighten capscrew (20)
to 35-40 lb-ft (47-54 N•m).
c. Front Seatbelt Installation
M1114 VEHICLES
22
21
20
23
19
24
25
26
12
13
14
15
27
16
17
18
1
2
3
4
5
6
7
8
9
9.1
10
11
