10-46. THREE POINT SEATBELT BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
NOTE
Replacement procedures for left and right seatbelt brackets are
basically the same. This procedure covers the left seatbelt bracket.
NOTE
Perform step 1 for M1113 models only.
1.
Remove four capscrews (3), washers (2), and upper bracket (1) from B-pillar (4).
2.
Remove four capscrews (6), washers (5), and lower bracket (7) from B-pillar (4).
1.
Install lower bracket (7) on B-pillar (4) with four washers (5) and capscrews (6). Tighten
capscrews (6) to 15-21 lb-ft (20-28 N•m).
NOTE
Perform step 2 for M1113 models only.
2.
Install upper bracket (1) on B-pillar (4) with four washers (2) and capscrews (3). Tighten
capscrews (3) to 15-21 lb-ft (20-28 N•m).
b. Installation
a. Removal
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Manual References
TM 9-2320-387-24P
Equipment Condition
Three point seatbelt removed (para. 10-47).
Maintenance Level
Unit
TM 9-2320-387-24-2
Change 1
10-77
FOLLOW-ON TASK: Install three point seatbelt (para. 10-47).
1
2
5
7
6
4
3
