33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-94
Change 1
1.
Using a 0.187-in. (4.75-mm) drill, remove nine rivets (1) from right rear floor panel (2).
2.
Position insert panel (3), with arrow facing down and toward front of vehicle, on underside of right
rear floor panel (2) and align mount hole (5) with hole in floor panel (2).
3.
Using insert panel (3) as a template, scribe an outline (6) on right rear floor panel (2).
4.
Using scribed outline marked in step 3 as a guide, cut and remove floor panel (4).
5.
Remove sharp edges and burrs on floor panel (2).
d. Right Rear Floor Panel Removal
