33-14. RIGHT REAR FLOOR PANEL REPAIR (Contd)
TM 9-2320-387-24-2
Change 1
33-93
6.
Cut metal strip (5) from sheet metal, and mark center line (6) and directional arrow (10). Identify
metal strip (5) as E.
7.
Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip E (5).
8.
Cut two metal strips (7) from sheet metal, and mark center line (8), and directional arrow (9).
Identify metal strips (7) as F and G.
9.
Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip F (7).
10.
Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip G (7).
METRIC CONVERSION
0.60 IN.
15.24 MM
1.20 IN.
30.48 MM
1.25 IN.
31.75 MM
1.40 IN.
35.56 MM
1.45 IN.
36.83 MM
METRIC CONVERSION
2.00 IN.
50.80 MM
2.50 IN.
63.50 MM
2.90 IN.
76.20 MM
3.00 IN.
35.56 MM
14.20 IN.
360.68 MM
DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES
DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES
DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES