33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-48
Change 1
3.
Using scribed outline marked in step 2, cut and remove floor panel (2) from left rear floor panel (1).
4.
Remove sharp edges and burrs from left rear floor panel (1).
5.
Position insert panel (3), with arrow facing down and toward front of vehicle, on underside of left
rear floor panel (1).
6.
Obtain a minimum clearance of 0.10-in. (2.54-mm) between edges of insert panel (3) and left rear
floor panel (1).
7.
Remove insert panel (3).
8.
Locate and mark two reference lines (4) on left rear floor panel (1).
