33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-52
Change 1
1.
Position reinforcement strip B (1) on insert panel (2), and align reference lines (3) with edges of
reinforcement strip B (1).
2.
Using reinforcement strip B (1) as a template, locate, mark, and drill eighteen 0.187-in. (4.75-mm)
diameter holes through reinforcement strip A (4) and insert panel (2).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of
reinforcement strip A (4) and reinforcement strip B (1).
4.
Position reinforcement strip B (1) on reinforcement strip A (4) and install with eighteen rivets (5).
5.
Remove any adhesive residue and clean edges of reinforcement strip B (1), reinforcement strip A (4),
and insert panel (2).
f. Reinforcement Strip B and Insert Panel Assembly
DRILL EIGHTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES
