33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-44
Change 1
1.
Cut two metal strips (2) from sheet metal, and mark two reference lines (1), centerline (3), and
directional arrow (4). Identify two metal strips (2) as C and D.
2.
Locate, mark, and drill twenty-four 0.187-in. (4.75-mm) diameter holes through metal strips C
and D (2).
3.
Bend metal strips C and D (2) 1.50 in. (38.10-mm).
c. Metal Strips Fabrication
DRILL TWENTY-FOUR 0.187-IN.
(4.75-MM) DIAMETER HOLES
METRIC CONVERSION
0.60 IN.
15.24 MM
0.75 IN.
19.05 MM
1.25 IN.
31.75 MM
1.40 IN.
35.56 MM
1.50 IN.
38.10 MM
2.00 IN.
50.80 MM
2.50 IN.
63.50 MM
3.00 IN.
76.20 MM
8.50 IN.
215.90 MM
32.70 IN.
830.58 MM
