33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-50
Change 1
1.
Position reinforcement strip A (2) on insert panel (1). Align reference lines (3) with edges of rein-
forcement strip A (2).
2.
Using reinforcement strip A (2) as a template, locate, mark, and drill fourteen 0.187-in. (4.75-mm)
diameter holes through insert panel (1). Remove reinforcement strip A (2).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surfaces of insert
panel (1) and reinforcement strip A (2).
4.
Position reinforcement strip A (2) on insert panel (1) and install with fourteen rivets (4).
5.
Remove any adhesive residue and clean edges on reinforcement strip A (2) and insert panel (1).
e. Reinforcement Strip A and Insert Panel Assembly
DRILL FOURTEEN 0.187-IN.
(4.75-MM) DIAMETER HOLES
