33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-46
Change 1
6.
Cut two metal strips (1) from sheet metal, and mark centerline (2). Identify metal strips (1)
as G and H.
7.
Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes through metal strips G
and H (1).
DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES
DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES
METRIC CONVERSION
0.60 IN.
15.24 MM
1.20 IN.
30.48 MM
1.25 IN.
31.75 MM
1.40 IN.
35.56 MM
2.50 IN.
63.50 MM
2.90 IN.
73.66 MM
3.00 IN.
76.20 MM
14.20 IN.
360.68 MM
