TM 9-2320-387-24-l
4-71. BUSS BAR REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Seven lockwashers (Appendix G, Item 212)
Sealing compound (Appendix C, Item 64)
Manual References
TM 9-2320-387-24P
Equipment Condition
Batteries removed (para. 4-74).
Maintenance Level
I a. Removal I
1.
Remove five nuts (91, lockwashers (81, washers (71, engine harness cable (61, alternator
cable (111, battery cable (lo), umbilical power cable (121, and slave receptacle cable (13) from buss
bar (2). Discard lockwashers (8).
2.
Remove nut (51, lockwasher (41, washer (31, capscrew (141, washer (16), lockwasher (15) and buss
bar (2) from power feed-through stud (1) and battery box (17). Discard lo&washers (4) Ad (15).
1 b. Installation 1
1.
Install buss bar (2) on battery box (17) and power feed-through stud (1) with lockwasher (15),
washer (161, capscrew (141, washer (3), lockwasher (4), and nut (5).
2.
Install engine harness cable (61, alternator cable (111, battery cable (101, umbilical power cable (121,
and slave receptacle cable (13) on buss bar (2) with five washers (71, lockwashers (81, and nuts (9).
3.
Apply sealing compound to buss bar (2), coating all exposed metallic surfaces.
-
FOLL ,OW-ON TASK: Install batteries (para. 4-74).
4-121
