TM 9-2320-387-24-
1
4-70. 12-VOLT REGULATOR CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
-&era1
mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Four tiedown straps (Appendix G, Item 463)
Two lo&washers (Appendix G, Item 205)
Lubricating oil (Appendix C, Item 46)
Manual References
TM 9-2320-387-10
TM 9-2320-387~24P
Equipment Condition
l Battery ground cables disconnected (para. 4-68).
l Hood raised and secured (TM 9-2320-387-10).
l Engine access cover removed (para. 10-22).
Maintenance Level
Unit
NOTE
Prior to removal, tag leads for installation.
1.
2.
3.
4.
5.
6.
7.
Slide back rubber boot (3) and remove nut (11, washer (21, and cable (4) from regulator (5).
Remove four tiedown straps (10) from cable (4). Discard tiedown straps (101.
Remove nut (71,lockwasher (81, clamp (91, and cable (4) from stud (61. Discard lockwasher (8).
Remove nut (16),lockwasher (151, screw (111, washer (12), clamp (131, and cable (4) from bracket (141.
Discard lo&washer (15).
Remove cap (23) from battery terminal boot (22).
Clean lubricating oil from battery terminal boot (22).
Remove nut (201, screw (17), cable (4), lead (18), and cable (19) from terminal clamp (21). Remove
cable (4) from battery box (24).
4-118
