TM 9-2320-387-24-l
4-58. MAIN LIGHT SWITCH REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-387-10
automotive (Appendix B, Item 11
TM 9-2320-387-24P
Materials/Parts
Lockwasher (Appendix G, Item 2051
Equipment Condition
Battery ground cables disconnected (para. 4-68).
Maintenance Level
Unit
1 a. Removal 1
1.
Disconnect cannon plug (11 from main light switch (81.
2.
Remove screw (6), lockwasher (51, single-position lever (41, and washer (7) from lever shaft (9) on
switch (8). Discard lo&washer (5).
NOTE
Lower right lever must be raised to remove screw.
3.
Remove four screws (3) from instrument panel (2) and switch (8).
4.
Remove switch (8) from behind instrument panel (2).
b. Installation
1.
2.
3.
NOTE
Lower right lever must be raised to install screw.
With lever shaft (9) at top of switch (8), install switch (8) on instrument panel (2) with four screws (3).
Install washer (71 and single position lever (41 on lever shaft (9) with lockwasher (5) and screw (6).
Connect cannon plug (1) to rear of switch (81.
FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-681.
‘ Check main light switch for proper operation (TM 9-2320-387-10X
4-98
