TM 9-2320-387-24-I
4-57. REAR COMPOSITE LIGHT ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
hlaterials/Parts
Four lockwashers (Appendix G, Item 208)
Equipment Condition
Battery ground cables disconnected (para. 4-68).
Maintenance Level
Unit
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
NOTE
Prior to removal, tag leads for installation.
II
1.
Remove two capscrews (3), lockwashers (41, ground lead 95B (5), and ground strap (6) from
housing (17). Discard lockwashers (41.
2.
Remove two capscrews (15) and lockwashers (16) and pull shield (1) away from D-beam (14). Discard
lockwashers (16).
3.
Remove nut (121, screw (2), and clamp (11) from shield (1).
4.
Disconnect leads 21(7), 23 (B), 24 (91, and 22-461 (10) from body harness (13).
5.
Remove composite light (18) from housing (17).
71
1.
Install composite light (18) on housing (17).
2.
Connect leads 21(7), 23 (8),24 (91, and 22-461(10) to body harness (13).
3.
Install clamp (11) on shield (1) with screw (2) and nut (12).
4.
Install shield (1) on D-beam (14) with two lockwashers (16) and capscrews (15).
5.
Install ground strap (6) and ground lead 95B (5) on housing (17) with two lo&washers (4) and
capscrews (3).
4-96
