This task covers:
a. Removal
b. Installation
a. Removal
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Material/Parts
Sealing compound (Appendix C, Item 60)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
3-69. FAN DRIVE HOSE AND QUICK-DISCONNECT REPLACEMENT
TM 9-2320-387-24-1
3-124
Change 1
NOTE
Apply sealing compound to all pipe threads during installation.
1.
Install male end of quick-disconnect (12) on fan drive (3).
2.
Install female end of quick-disconnect (2) on fan drive hose (1).
3.
Install bulkhead adapter (11) on fan drive hose (1).
4.
Install bulkhead adapter bushing (8) on bulkhead adapter (11).
5.
Install bulkhead adapter (11) and bulkhead adapter bushing (8) on shroud (4) with washer (7) and
nut (6).
6.
Install hose (1) and fan drive hose quick-disconnect (2) on fan drive (3).
7.
Install elbow (5) on bulkhead adapter bushing (8).
8.
Install control valve hose (9) on elbow (5).
b. Installation
NOTE
Have container ready to catch fluid.
1.
Remove control valve hose (9) from elbow (5).
2.
Remove elbow (5) from bulkhead adapter bushing (8).
3.
Remove nut (6), washer (7), and bulkhead adapter bushing (8) with bulkhead adapter (11) from
shroud (4).
4.
Release fan drive hose quick-disconnect (2) and remove hose (1) from fan drive (3).
5.
Remove bulkhead adapter bushing (8) from bulkhead adapter (11).
6.
Remove bulkhead adapter (11) from fan drive hose (1).
7.
Remove female end of quick-disconnect (2) from fan drive hose (1).
8.
Remove male end of quick-disconnect (12) from fan drive (3).
